日韩国产欧美视频一区二区三区,欧美在线精品永久免费播放,国产亚洲欧美另类第一页

您的位置：網站首頁> 技術論文

采用鋁灰和粉煤灰合成Sialon粉

發布時間: 2012-09-15 10:41 查看: 1606次

鋁灰粉煤灰 Sialon 碳熱還原氮化法
摘要：

以鋁灰、粉煤灰和碳黑為主要原料,采用碳熱鋁熱復合還原氮化工藝制備了Sialon粉體.研究了原料組成(Si/Al比分別為1.5、1和0.27)、碳黑含量(分別為10%、17%、22%和27%)以及合成反應溫度(分別為1400, 1450, 1500 ℃)對生成物相的影響.結果表明,合成溫度為1450 ℃,可以得到較純的物相;隨著還原劑碳黑含量的增加,使還原氮化反應進行的更為充分;在原料中Si/Al比為1時,加入17%的碳黑可以得到主要物相為Si_3Al_3O_3N_55(β-Sialon,z=3)和SiAl_4O_2N_4(15R)的產物;在原料中Si/Al比為1.5時,即加入80%的粉煤灰,在1450 ℃可以制備較純的Si_3Al_3O_3N_5粉.

Abstract：

Sialon powders were synthesized using aluminium dross, fly ash and carbon black as main starting materials by the C-Al compound reduction and nitridation process. The effects of different factors on the phase of products were studied, such as the compositions of raw material (the proportion of Si/Al is 1.5, 1 and 0.27), the content of carbon black (10%, 17%, 22% and 27%) and heating temperature (1400,1450 and 1500℃). The results show that the relatively pure Sialon powders can be obtained at 1450 ℃; the process of reduction-nitridation is effectively accelerated by the increase of the carbon black content. When the proportion of Si/Al is about 1, the main phases of products are Si_3Al_3O_3N_5(β-Sialon,z=3) and SiAl_4O_2N_4(15R) using 17% carbon black; at 1450℃, a nearly pure Sialon powder ( the main phase is Si_3Al_3O_3N_5) can be obtained when the proportion of Si/Al is about 1.5 and the fly ash content is 80%.

點擊圖片進入活動官網預約參會 >>

>> 相關內容